Training

Learn new skills and develop your technical capacity in energy efficiency and renewable energy.

Training incentives are here

All Alberta residents are eligible to receive the training incentives for courses listed below.

Incentive amounts range from 20-30% of course costs. Members of the Efficiency Professionals (E Pro) Network will benefit from an additional incentive for each training course.

How to redeem your training incentive

Incentives are applied at the time of course registration through the training providers. Please refer to the links below for course-specific details. You will be asked to confirm your Alberta address.

If you're an employee of an E Pro Network member company, you're eligible for an additional E Pro Network member incentive as described for each course below. Email us to receive your E Pro Network discount code.

*Courses, schedules, costs and incentive amounts are subject to change.

Foundational courses

Gain foundational knowledge in an area of energy efficiency or renewable energy by taking one of these courses.

Introduction to Measurement and Verification (M&V) Toggle content

The IPMVP® is the energy savings verification protocol most commonly used in the world. Many individuals, such as institution owners and leaders, energy managers and ESCO services suppliers, need to develop a general understanding of the methods used to conduct measurement and verification (M&V), though they do not have to possess in-depth expertise as needed by certified CMVP® professionals.

This one-day workshop introduces the basic concepts of M&V and the International Performance Measurement & Verification (IPMVP) protocol that has become the most prominent reference of M&V in North America and around the world. It highlights the purposes of M&V, summarizes the range of possible M&V methods and points out the need for specific M&V design for each project.

The program is designed primarily for facility energy managers and energy efficiency program designers, as well as project managers, consultants and anyone interested in acquiring a basic understanding of M&V and IPMVP.

Incentive: $90 (additional E Pro incentive: $50)

Course Provider: Canadian Institute for Energy Training (CIET)

Efficient Building Envelope (EBE) Toggle content

This two-day Efficient Building Envelope (EBE) course introduces the concept of a building as a system and takes an in-depth look at the interrelationship between the building envelope and installed mechanical sub-systems. The course will examine the principals of heat loss/gain through the envelope (wall, roof, floor and fenestration), and explore the interactions with equipment and occupants.

The importance of air tightness, thermal bridging, and moisture control will be discussed in detail using a variety of typical commercial construction types, with heavy focus placed on designing efficient and durable assemblies. Finally, participants will gain insight on the three compliance pathways available to Part 3 buildings under the newly revised National Energy Code of Canada for Buildings (NECB 2011).

This program is targeted to architects, engineers, technologists, developers, contractors, consultants, building and home inspectors and technical sales professionals.

Incentive: $170 (additional E Pro incentive: $90)

Course Provider: Canadian Institute for Energy Training (CIET)

Introduction to Combined Heat and Power Toggle content

This one-day introduction to Combined Heat and Power (CHP) course covers the fundamental technical, economic and regulatory knowledge related to cogeneration. These topics are presented in sufficient detail to allow participants to develop an understanding of the entire process, including load assessment, system design principles and economic analysis.

This program is targeted to plant engineers and managers, utility professionals, energy managers, engineers and consultants, industrial facility managers, and facility managers from the educational, healthcare and municipal sectors.

Incentive: $90 (additional E Pro Incentive: $50)

Course Provider: Canadian Institute for Energy Training (CIET)

Fundamentals of compressed air systems Toggle content

During this one-day course, you'll learn how to calculate and reduce the costs of compressed air in your facility and how to gain better control of compressed air for optimum reliability and productivity. You’ll use data from your facility and complete hands-on exercises with emphasis on bottom-line results. Furthermore, you'll know how to focus on getting results when you return to your plant.

This program is targeted towards plant engineers, maintenance supervisors and other personnel responsible for compressed air systems in an industrial setting.

Incentive: $130 (additional E Pro incentive: $60)

Course Provider: Canadian Institute for Energy Training (CIET)

BOMA e-Energy Training Toggle content

BOMA e-Energy Training is an energy management course for building operators and managers of commercial and institutional buildings. Delivered online, in a self-learning format, participants learn at their own pace, and have access from remote locations. Upon completion of the course, participants will understand basic energy principles, identify energy reduction opportunities, develop strategies and learn how to influence stakeholders to adopt energy savings behaviour. The program highlights operational and capital project energy management opportunities.

Topics covered:

  • Energy Management Overview
  • Behavioural Opportunities
  • Energy Basics
  • Metering and Billing
  • Lighting Systems
  • Electrical Systems
  • HVAC Systems
  • Heating Systems
  • Cooling Systems
  • Building Controls
  • Selling the Project

Participants will have up to 6 months to complete the course from date of payment, and in order to be eligible to receive the incentive the course must be completed by March 31, 2020. It is estimated that 20 - 30 or more hours are needed to complete the entire course. Each module includes interactive exercises and quizzes to help registrants understand key concepts.

Incentive: $150 (additional E Pro incentive: $70)

Course provider: Building Owners and Managers Association of British Columbia

Exam preparation courses

Prepare for your NRCan Foundation Level or Energy Advisor Exam by taking part it one of these incentivised exam preparation courses.

Prep course for the NRCan ERS v15 Energy Advisor Exam Toggle content

Energy Advisors assess the energy performance of residential homes and provide advice on potential energy savings during design, construction, and renovations.

This class is designed to prepare students for the Natural Resources Canada Exams. To become a registered Energy Advisor with Natural Resources Canada, prospective candidates must first pass the Foundation Level and Energy Advisor Exams. After successfully passing these exams, there is a requirement for probationary files to be completed with a licensed service organization.

After the Energy Advisor designation has been obtained, individuals in association with a licensed service organization will be able to conduct energy evaluations in accordance with NRCan’s EnerGuide Version 15 guidelines on Part 9 residential buildings, excluding multi-unit residential buildings, which is an additional required certification.

The program is designed for individuals with an interest in energy efficiency and individuals wanting to become an Energy Advisor to conduct residential energy evaluations.

Incentive: $240 (additional E Pro incentive: $120)

Course providers:

Prep course for the NRCan Foundation Level Exam Toggle content

The Foundation Level course is the first step in becoming an Energy Advisor. This two-day course provides an overview of building science issues and sound business practices. Candidates will gain valuable knowledge in energy-efficient homebuilding techniques. This course prepares students for success when taking the Natural Resources Canada Energy Foundations Exam. Learners are required to register for and complete the standardized exam separately.

The program is designed for individuals with an interest in energy efficiency and those who want to become an Energy Advisor to conduct residential energy evaluations.

Incentive: $170 (additional E Pro incentive: $80)

Course Providers:

Solar energy courses

New to the solar industry or just want to improve your skills? These incentivized solar energy courses are available.

Solar photovoltaic design and modelling class Toggle content

This course is presented as a series of case studies with practical design examples used throughout. Advances in PV technology, the economics of PV systems and the PV industry in general will also be discussed in context.

This class is designed for electricians, technicians, engineers, solar installers, salespeople and those with a basic understanding of electrical theory and electrical terminology who wish to understand how to design and evaluate the performance of solar electric systems.

Incentive: $120 (additional E Pro Incentive: $60)

Course Provider: Solar Energy Society of Alberta (SESA)

Solar energy storage system design and modelling Toggle content

This class is for those with an understanding of electrical theory and electrical terminology for PV systems, who wish to understand how to design and evaluate the performance of battery based solar electric systems.

This class is designed for electricians, technicians, engineers, solar installers and sales people.

Incentive: $120 (additional E Pro incentive: $60)

Course Provider: Solar Energy Society of Alberta (SESA)

Solar PV Canadian Electrical Code class Toggle content

This seven-hour class is designed for Electrical Safety Codes Officers with the 2015 and 2018 Canadian Electrical Code updates for solar electricity. It will include inspector’s checklists, which address the most crucial inspection points of the four typical solar photovoltaic system types.

This class is designed for electricians, technicians, engineers, solar installers, salespeople and those with a basic understanding of electrical theory and electrical terminology, who want to ensure that their solar installations are up to current Canadian Electrical Code standards.

Participants will receive a certification of completion upon passing a one-hour exam at the end of the workshop. A pass mark is 70%

Incentive: $50 (additional E Pro incentive: $20)

Course Provider: Solar Energy Society of Alberta (SESA)

Contracts for the solar industry Toggle content

If you're responsible for signing or writing construction contracts, this workshop is for you. Most contracts are lacking clarity in technical details and participant responsibilities, and often don’t address critical project risks and variables. You need to control construction costs and minimize scope of work issues. Learn how to improve your contracts and reduce your risks in this class. This workshop focuses primarily on “construction” contracts by ensuring project details, risks and variables are fully understood. Proper technical details and participant responsibilities can become the core of these successful contracts. The non-technical, legal considerations are also introduced, but these require more time than we have in this one-day workshop. Workshop attendees will benefit from a sample template to build their own contracts, plus contract planning documents and a copy of the extensive presentation.

Incentive: $50 (additional E Pro incentive: $20)

Course Provider: Solar Energy Society of Alberta (SESA)

Grid-connected Solar PV design and installation course Toggle content

This five-day course meets the prerequisite of in-class and hands-on experience training electricians need for writing the CSA Solar Photovoltaic (PV) Systems Certified (SPVC) Certification (NOC 7241). Join us to get a solid footing in the theoretical, social, environmental, and practical application of solar PV design and installation.

This course is focused on practical skills for electricians but is also appropriate for professionals who require hands-on knowledge of photovoltaics assessment, materials, and installation practices.

Incentive: $300 (additional E Pro incentive: $170)

Course Provider: Gridworks Energy Group Inc.

Solar PV design and installation course Toggle content

This workshop will provide a thorough understanding of the unique aspects of solar PV system design and installation. It will cover the importance of system sizing, component selection as well as good design and installation practices. The workshop will constitute both theoretical and practical sessions ending with a competency examination. The course is recognized by the CSA and successful participants in the workshop who are electricians can write a separate CSA PV Technician test.

Incentive: $300 (additional E Pro incentive: $170)

Course Provider: Canadian Solar Institute

Solar Installers Canada (SIC) CSA PV Toggle content

The four-day SIC CSA course is designed for all skill levels. This course is designed to cover all the essential knowledge in the PV industry. Our team of instructors will teach you how to design a PV array from the ground up. Learn how to identify customers’ needs and what considerations go into installing a system that meets their needs. We cover grid interconnected, stand-alone/off grid and marine/RV systems. This course is taught with all the most current and updated equipment and techniques. Completion of this course and CSAPV exam (exam only available to registered electrical apprentices or licensed electricians) will provide Canada’s only nationally recognized install certificate.

Incentive: $300 (additional E Pro incentive: $200)

Course Provider: Solar Installers Canada (SIC)

Solar PV installation for electricians (ALTE506) Toggle content

Learn how to successfully install and troubleshoot solar photovoltaic residential systems. NAIT believes in the value of hands-on teaching, and this course is structured to allow you, a journeyman electrician, to become a competent and confident installer, ready to enter the growing renewable energy market with the required skills.

This course is recommended for any journeyman electrician who wants to become a residential solar installer.

Incentive: $250 (additional E Pro incentive: $120)

Course Provider: Northern Alberta Institute of Technology (NAIT)

Certification courses

Build on your existing capabilities by gaining a new certification

Advanced course on building recommissioning Toggle content

This four-day advanced building recommissioning course (RCx) covers all the stages of the recommissioning process: planning, investigation, implementation, hand-off and persistence. These stages are presented in detail to allow trainees to develop a coherent understanding of the entire process and reap all the anticipated benefits. The fundamental principles regarding the use of mechanical systems in buildings are discussed and the good practices for testing and verification are examined to help trainees develop an in-depth understanding of the investigation stage. To share insight on how to maintain the benefits of the RCx process throughout the life cycle of buildings, the course not only teaches building operating staff the persistence strategies to be implemented but also highlights the kinds of appropriate intervention strategies in energy monitoring that can be carried out by third-party RCx service providers. This advanced recommissioning (RCx) course, developed by CanmetENERGY of Natural Resources Canada, has trained 75 professionals in the province of Quebec. Upon completion of the course, trainees may choose to take a competency examination.

This program is targeted towards building recommissioning (RCx) service providers, building operating staff, energy managers, general engineering professionals with experience in HVAC systems, and commercial and institutional buildings operation.

Incentive: $520 (additional E Pro incentive: $180)

Course Provider: Canadian Institute for Energy Training (CIET)

Building Operator Certification (BOC) Toggle content

Building operators are responsible for day-to-day maintenance and operation of large buildings with complex heating, mechanical and electrical systems, which offer an excellent opportunity for significant energy savings. You and your company can do a lot to ensure that your buildings operate as energy-efficiently as possible: increase tenant comfort; save money; and reduce your environmental footprint. The Building Operator Certification (BOC®) program is eight modules rolled out over nine-day skills-based training and certification program which affords facility personnel improved job skills and knowledge to transform workplaces into more comfortable, energy-efficient and environmentally friendly environments.

BOC training is available for building operators with two or more years experience in building operation and maintenance, who wish to broaden their knowledge of the total building system.

Incentive: $740 (additional E Pro incentive: $250)

Course Provider: Canadian Institute for Energy Training (CIET)

Certified Energy Auditor Toggle content

The Certified Energy Auditor (CEATM) certification targets professionals with the knowledge and experience required to succeed in the growing field of energy auditing. This three-day training is designed to expand participant knowledge in energy auditing as well as serve as a preparatory vehicle for the examination required to achieve the AEE’s CEATM credential. It provides the fundamental knowledge needed to evaluate how energy is being used in a facility and identify where consumption can be reduced. Additionally, it covers useful calculation methods and practical examples. The examination is administered on the morning of the day following training.

This program is available to energy engineers and consultants, current energy auditors seeking certification, new energy auditors, plant and facility engineers, energy managers, ESCO professionals, energy performance contracting professionals, organisations considering energy projects and instructors teaching energy analysis.

Incentive: $470 (additional E Pro incentive: $160)

Course Provider: Canadian Institute for Energy Training (CIET)

Please note there are additional course eligibility requirements for this course, please refer to the course eligibility requirements here.

Certified Energy Manager (CEM) training Toggle content

The Certified Energy Manager (CEM®) certification is the most recognized designation in energy management providing a wide range of benefits to help you thrive in your occupation. This five-day program covers the technical, economic and regulatory aspects of energy management as well as the latest energy cost reduction techniques and strategies. The program offers a discussion and problem-solving forum, preparation tailored for the CEM®.

This program is available to energy management professionals, project engineers, energy managers from the industrial, building and public services sector and service providers with a combination of a relevant degree and experience. Please note that there are additional course eligibility requirements for this course.

Incentive: $780 (additional E Pro incentive: $270)

Course Provider: Canadian Institute for Energy Training (CIET)

Specialization courses

Gain specialized knowledge around a specific topic to become an energy efficiency champion in your field

Advanced heat recovery and industrial energy efficiency Toggle content

Learn how to reduce energy consumption in complex, energy-hungry industrial plants by 10 to 30% using NRCan’s free INTEGRATION software to identify proven and practical techniques. This course for engineers and plant managers, developed by Natural Resources Canada, provides the theory and tools necessary to identify advanced heat recovery and industrial energy efficiency savings beyond what would be turned up in a plant audit. You’ll learn to identify cost-effective heat recovery opportunities using pinch analysis; the course also covers optimization of and heat recovery from steam, refrigeration, and compressed gas systems.

Incentive: $270 (additional E Pro incentive: $130)

Course Provider: RER Energy Inc. and Process Ecology

Clean energy project analysis with RETScreen Expert Toggle content

RETScreen Expert is the latest version of the leading clean energy decisions support software from Natural Resources Canada. Using this software, building/facility operators, equipment/service providers and clean energy proponents will learn:

  • More about the capabilities and costs of clean energy technologies ranging from solar photovoltaics to efficient building technologies.
  • How to do a solid financial analysis of a proposed clean energy project, including sensitivity and risk analysis.
  • How to determine the most cost-effective clean energy options.
  • How to track ongoing energy consumption or production for a building, industrial operation or green power project using linear regression, CUSUM, and measurement and verification techniques.
  • How to follow the performance of a portfolio of facilities.

Participants will receive a three-month subscription to RETScreen Expert, worth $225, and use the software to work through six case studies related to solar photovoltaics, combined heat and power, building envelope, lighting, variable speed drives, pumps and other clean energy technologies, selected based on participant interest.

Incentive: $150 (additional E Pro incentive: $80)

Course Provider: RER Energy Inc.

Foundational Dollars to $ense based courses

Since 1997, over 30,000 representatives of industrial, commercial and institutional (ICI) organizations from across Canada have enrolled in the Dollars to $ense (D2$) energy management workshops. The new version of D2$ is now presented in 30 modules, which can easily be used as building blocks for organizations that have limited resources or that wish to focus on specific topics.

Customizable Dollars to $ense Toggle content

Since 1997, over 30,000 individuals from across Canada have enrolled in Dollars to Sense (D2$) energy management workshops. In 2016, Natural Resources Canada (NRCan) granted the exclusive license to CIET for the workshops, which are comprised of 30 modules (each module amounts to 2-3hrs of training) that can easily be used as building blocks for organizations that have limited resources or wish to focus on specific aspects of Energy Efficiency.

A customizable on-site workshop can be developed based on the needs of your organisation. Organisations are encouraged to review the complete list of modules and contact CIET to set up a workshop. Individuals looking to register for a standard workshop can choose from any of the other course options identified as a Dollars to $ense Based Course.

Incentive: $190 (additional E Pro incentive: $90) – Based on an average course cost of $990/participant. Exact cost will vary based on the length of the customized workshop.

Course provider: Canadian Institute for Energy Training (CIET).

Energy Management Professional 101 Toggle content

Whether you are a recent arrival to Canada, a new professional just entering the job market, a student completing their studies, or looking to further your career in energy efficiency, CIET has developed a course that will give you pragmatic knowledge and skills that you can demonstrate and apply to an employer from the outset. The program can also be seen as a steppingstone toward the Certified Energy Manager (CEM) designation – which is normally taken only after at least three years of experience in the field. This is a new 3-day course that CIET has created to fill a gap with participants who want to be trained in energy management, but are not ready for the Certified Energy Manager (CEM).

Participants in this course will:

  • Be exposed to the principles, systems, codes and regulations that govern energy efficiency
  • Gain well-rounded knowledge of energy management
  • Understand the basics of how to calculate energy, benchmark and audit
  • Learn where energy savings can be found in a building or facility
  • Teach participants about energy supply and management

Incentive: $190 (additional E Pro incentive: $90)

Course provider: Canadian Institute for Energy Training (CIET).

Accelerated Energy Management Toggle content

This exciting two-day workshop is a highly hands-on and interactive experience. Facilitators will utilize a variety of physical demonstrations, calculation worksheets, graphic slides, case studies and discussion to create an effective learning environment.

Designed for a broad audience with both technical and non-technical backgrounds, the goal of this experience is to equip participants with effective approaches and tools to meet the challenges of energy management.

Incentive: $190 (additional E Pro incentive: $90)

Course Provider: Canadian Institute for Energy Training (CIET)

Making the case for Energy Efficiency Toggle content

Although the benefits and justification of energy efficiency may seem obvious to some of us, this is not often the case for many of our clients and even our colleagues. Being able to articulate and present the many positive attributes of energy efficiency – from operational cost savings to conservation to reduced equipment maintenance – is key to selling energy efficiency projects.

Drawing from the experience of our expert instructors, as well as from highly relevant material from NRCan’s Dollars to Sense program, CIET has created a one-day workshop to help you make the case for energy efficiency.

Upon completion of this hands-on workshop, participants will be able to:

  • Determine how best to present energy efficiency-related information to every stakeholder
  • Better present the added value of their energy efficiency projects or services
  • Understand the various financial analysis terms and ratios (internal rate of return, payback, net present value, etc.)
  • Prepare a financial analysis using a simple spreadsheet and/or RETScreen Expert
  • Develop and present complete, effective short proposals for energy efficiency projects

This course is relevant to all those involved in selling energy efficiency to colleagues or management within their own organization, and also for those who are trying to sell energy efficiency retrofits, projects or technologies to external clients.

Incentive: $110 (additional E Pro incentive: $60)

Course Provider: Canadian Institute for Energy Training (CIET)

Energy Efficiency for Building Operators and Maintenance Staff Toggle content

This is a new 2-day course that CIET has created to fill a gap with building operators and maintenance staff who need to build their capacity and be empowered in order to contribute to energy efficiency efforts and the reduction of operations and maintenance costs. This highly interactive course also features an Energy Hunt on the second day, during which participants will learn the skills necessary to maximize efficiency in their own buildings. This course can also be considered as an accessible steppingstone for the comprehensive Building Operator Certification (BOC) program.

Participants in this course will:

  • Learn how building operations impact energy consumption and how to identify energy waste
  • Determine how you can improve energy efficiency through building maintenance and operations
  • Gain expertise on how to conduct simple energy savings calculations, and explain savings to others
  • Learn how building control strategies can be used to reduce energy consumption and costs
  • Gain a better understanding of the optimization of heating, ventilation & AC
  • Understand how to reduce energy through equipment selection/replacement

Incentive: $170 (additional E Pro incentive: $90)

Course provider: Canadian Institute for Energy Training (CIET).

Additional resources

Blog Energy efficiency at work